Berkomunikasi dengan pembekal? Pembekal
Brandon Bao Mr. Brandon Bao
Apa yang boleh saya lakukan untuk anda?
Sembang sekarang Hubungi pembekal
 Tel:86-0574-83879820 E-mel:brandon@brandopneumatic.com
Home > Produk-produk > Injap Jet Pulse > Injap Pulse Electromagnetic Pneumatic CA25T
Injap Pulse Electromagnetic Pneumatic CA25T
Injap Pulse Electromagnetic Pneumatic CA25T
Injap Pulse Electromagnetic Pneumatic CA25T
Injap Pulse Electromagnetic Pneumatic CA25T
  • Injap Pulse Electromagnetic Pneumatic CA25T
  • Injap Pulse Electromagnetic Pneumatic CA25T
  • Injap Pulse Electromagnetic Pneumatic CA25T
  • Injap Pulse Electromagnetic Pneumatic CA25T

Injap Pulse Electromagnetic Pneumatic CA25T

    Jenis bayaran: L/C,T/T,Paypal,Western Union
    Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
    Pesanan minimum: 1 Piece/Pieces
    Masa penghantaran: 7 Hari
Hubungi sekarang

Maklumat asas

Model No.: CA25T

Disesuaikan: Disesuaikan

Pensijilan: ISO, CE

Kuasa: Pneumatik

Tekanan: Tekanan Sederhana

Suhu Kerja: Suhu Normal

Bahan: Aluminium

Brand: Brando

Additional Info

Pembungkusan: kotak, karton, kes, palet

Produktiviti: 100000pcs per month

Jenama: Brando

Pengangkutan: Ocean,Land,Air

Tempat asal: Ningbo, China

Keupayaan bekalan: 100000pcs per month

Sijil: CE.ISO

Port: Ningbo,Shanghai,Tianjing

Penerangan produk

Injap Pulse Electromagnetic Pneumatic CA25T


  • Jenama : NBSANMINSE
  • Bahan : aloi
  • Kuasa : Solenoid
  • Tekanan : Tekanan Rendah
  • Standard atau Standard : Standard
  • Suhu Media : Suhu Normal
  • Saiz Pelabuhan : G1 / 2 ", G3 / 4", G1 ", G1-1 / 4"
  • Nombor Model : QG-Z-15, QG-Z-20, QG-Z-25, QG-Z-35
  • Media : Air
  • Struktur : Injap Diafragma
  • Tekanan : 0.3 - 0.8MPa
  • Sederhana : udara bersih
  • Voltan : DC24V / AC110V 220V / Disesuaikan
  • Badan : ADC 12 Die Cast
  • Armature : 430FR Stainless Steel
  • Jenis : Jenis Sudut Kanan

Use period
Failure phenomena
Possible Reason
Troubleshooting
During installation and commissioning
The valves cannot all be opened, but the leading part does act.
Check the gas dome pressure to see if it is too low.
Check the leakage
Some valves do not work, but the others are normal.
Check the valve coil connection and coil
Replace the accessories
The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.
Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.
Check the leakage
Z-valve. The valve inlet and blowing muzzle are installed backwards.
Re-install
Some valves cannot be closed. There is leakage.
There is some dirt or debris on the membrane, ii is blocking the moving iron core.
Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
A valve closing is slowly.
The membrane orifice is blocked.
Dredge the membrane orifice
During use period
Some valves are leaking. The membrane cannot close tightly and the valve is always open a
little.
There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.
Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
Coil is hot and burned out.
It has been turned on for too long.
Check the working condition of the control system.
Voltage exists but the valve does not operate.
Membrane is damaged and the orifice is blocked.
Replace the accessories in time.
Ambient temperature is below -20℃. The valve is leaking and cannot open.
Ambient temperature is too low and here is frost in the valve.
Pay attention to insulation and maintaining proper temperatures.

Sebelum menjalankan apa-apa aktiviti penyelenggaraan pada sistem, pastikan komponen-komponen itu terasing sepenuhnya dari tekanan dan kuasa
bekalan. Tekanan dan kuasa tidak perlu dilipat semula sehingga injap telah dipasang sepenuhnya.Diaphragm dan pemeriksaan perintis
perlu dijalankan setiap tahun.

1554777846(1)

1554778315(1)


IMG_4234


KELEBIHAN produk kami mempunyai:

Badan injap dan penutupnya mati-tuang padat dan ditutup dengan cat yang jelas untuk meningkatkan ketahanan kakisan.
Pad seal pada diafragma diperbuat daripada logam dan getah, yang tegar dan tidak bocor.
Pemimpin ketua elektromagnetik, tindakan sensitif dan boleh dipercayai.
Satu sama lain: Model yang sama, spesifikasi semua produk lain, bahagian boleh universal, boleh ditukar ganti.
Prestasi yang stabil dan boleh dipercayai, hayat perkhidmatan diafragma mencapai lebih daripada 1 juta kali.


Tolong berikan pertanyaan!


Kategori produk : Injap Jet Pulse

E-mel kepada pembekal ini
  • Mr. Brandon Bao
  • Mesej anda mestilah antara watak-watak 20-8000

Senarai Produk Berkaitan

Rumah

Phone

Skype

Siasatan